Mechanicum Triaros Armored Conveyor

Posted: September 20, 2015 in Galleries, Work in Progress
Tags: , , , , , ,

So, a little tease on the Mechanicus front.  I painted up one of these Forge World beauties for the ever growing army of my friend J.S.  This is quite a nice model with lots of detail to bring the Martian atmosphere to he tabletop.  I stayed with the color scheme of his other Mechanicus pieces.  The result is quite striking I think.

DSCN8947

The body and top are monolithic pieces that (in my case) did not align as well as I would like.  I donned a dust mask and wrapped a wooden block wrapped with 400-grit sandpaper to get a flush join.  If you have trouble identifying the surfaces that need sanded, briefly sand one face on the wooden block to get it mostly flat.  Do NOT remove a lot of material at one go.  A half-dozen passes of the block will help get things started.  Then you should rub that face with a pencil  .Press the mating face of the complimentary piece firmly against it.  Look for smudges of transfer to identify the spots on it that need smoothed down.  Repeat while alternating pieces until you get a good join.  Remember to alternate which piece you sand so as not to remove more than absolutely necessary.  This method helps get a tight and flush join without removing too much material or resorting to large amounts of greenstuff plugging.

Assembly is pretty straight forward.  However, with the way the final assembly would hinder painting detail, I did paint the model in assemblies – body, shroud, gears, and sides.  Because of the small number of large pieces and the way that they join, the model required very few pins.  I did go ahead and magnetize the weapons and targeter because the stems seemed a bit fragile for the weight of the model.  Any shift during transport might have snapped them off.  Be careful to ensure the model sits flat when gluing the tracked sections to the body.  I have seen some of these with a terrible wobble to them.

Overall, another fun model from the boys at Forge World.  I’m sure that I’ll be doing more for the Mechanicum.  But, for now, there is a fresh batch of Skitarii sprues waiting to be assembled.  Onward!

 

Advertisements
Comments

Feel free to leave comments, suggestions, or questions.

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s